Prepare workers who may enter IDLH atmospheres to know the parts of an SCBA, don and doff the unit correctly and control their breathing.
This essential respiratory protection training program covers the proper selection, use, inspection, and maintenance of Self-Contained Breathing Apparatus (SCBA)—critical life-safety equipment used by workers who must enter Immediately Dangerous to Life or Health (IDLH) atmospheres. IDLH environments pose immediate threats from oxygen deficiency, toxic gases, chemical vapors, smoke, or other contaminants that could cause death, immediate irreversible health effects, or impair a worker's ability to escape. Firefighters, emergency responders, hazmat technicians, confined space rescue teams, and industrial workers will learn the three main components of SCBA systems: the high-pressure compressed air tank (typically 2,216 psi or 4,500 psi), the pressure regulator that reduces tank pressure to breathable levels and delivers air on demand, and the inhalation connection (full facepiece mask) that creates an airtight seal to deliver clean breathing air while preventing contaminated atmosphere from entering. The training covers proper donning and doffing procedures to ensure correct equipment assembly and facepiece seal before entering hazardous atmospheres. Participants will learn pre-use inspection requirements including pressure gauge readings, low-air alarms, regulator function, facepiece condition, and strap adjustment. The course addresses proper breathing techniques to conserve air supply, monitoring remaining air pressure, buddy system protocols, and emergency procedures when air supply runs low or equipment malfunctions. Additional topics include SCBA maintenance and cleaning procedures, storage requirements to prevent damage and contamination, fit testing requirements for different facepiece sizes, medical evaluation and clearance for SCBA use, and regulatory compliance with OSHA's respiratory protection standard (29 CFR 1910.134). This comprehensive training ensures workers can safely don, operate, and maintain SCBA equipment in emergency situations where their lives depend on this critical respiratory protection.
SCBA training is needed by anyone who may wear a self-contained breathing apparatus in an atmosphere immediately dangerous to life or health. That includes firefighters, hazmat technicians, confined space rescue teams, industrial emergency responders, and workers entering oxygen-deficient or toxic areas. The 13-minute video is available in English.
SCBA use falls under OSHA's respiratory protection standard, 29 CFR 1910.134. Employers must provide medical evaluation, fit testing, and training before use, and retrain at least annually. For IDLH atmospheres, the standard requires a full facepiece pressure-demand SCBA or a supplied-air respirator with an auxiliary self-contained air supply.
An SCBA has three main parts: a high-pressure air cylinder, a regulator, and a full facepiece, mounted on a backpack frame. The cylinder typically holds air at 2,216 or 4,500 psi. The regulator reduces that pressure and delivers air on demand, while the facepiece seals out the surrounding atmosphere.
An SCBA kept for emergency use must be inspected at least monthly under 29 CFR 1910.134, as well as before and after each use. Checks cover cylinder pressure, regulator and alarm function, facepiece, straps, and valves. Cylinders must be recharged when pressure falls to 90 percent of the manufacturer's recommended level.
When an SCBA low-air alarm sounds, stop work and leave the hazardous atmosphere immediately with your partner. The alarm means you are using reserve air intended for escape. Breathe steadily to conserve air, and keep the facepiece on until you reach clean air.
Schedule a demo with one of our reps
Our extensive Learning Management System allows you to dispatch knowledge and required certificates to teams across your site portfolio.
Our platform caters to all learning styles and scenarios, ensuring effective knowledge retention.
Take control of the learning experience with our configurable class structure. Tailor the training journey to match your organizational needs.
Deliver targeted safety training regimens at every level, putting safety directly into the hands of your workforce.
Deliver more than 400 online safety courses as well as your own training with the SafetyAmp learning management system.
Easily enroll employees into training courses, whether they're in a classroom or taken online - then visualize training history and compliance across multiple locations.
SCORM-compatible
Library of 400+ courses from partner training providers
Create online training courses
Quickly view employee training history
Schedule classroom training sessions
Manage training renewals
Eliminate lost certificates
Built-in reports for training compliance
Other Courses
Build confidence for critical moments through clear Hot Work Safety: Welding, Cutting, and Brazing instruction on frequent hazards associated with welding, cutting, and brazing.
Make workplace requirements clearer. Get a practical overview of spaces using OSHA’s three-pillar criteria for bodily entry in Confined Spaces: Acceptable Entry Conditions.
Give maintenance workers a clear six-step lockout/tagout routine, from identifying hazardous energy to verifying isolation before any work begins.
Made in the U.S.A.
© Copyright 2026